TROUBLESHOOTING
AND SPECIFICATIONS
TROUBLESHOOTING
Please make these simple checks before calling service.
These tips can save your time and money.
NO POWER
•
Make sure the power cord is inserted fully into a 230-240V/50Hz outlet.
•
Check to be sure outlet is not controlled by a wall switch.
•
Unplug the power cord, wait 1 minute, then reinsert the plug and push the POWER button.
NO
VOLUME
•
Make sure the correct source has been selected (for instance,
AV1
should be selected when
playing from the AV1 source).
REMOTE CONTROL
•
Check, and if necessary, replace batteries.
DOESN'T WORK
•
Make sure the remote control is pointed head-first at the unit.
•
The remote control may be either too far away from the unit or not in front of the Receiver.
•
Make sure the source selected is same as the input source.
CAN’
T OPERATE
•
Have you loaded a disc?
•
Is the disc unplayable?
NO PLAYBACK IMAGE
•
Are the video and audio cords connected correctly?
•
Is the disc scratched?
•
Is the disc dirty?
•
Is the input selector on the
TV set to
“
VIDEO”
or
“
AV”
?
•
Is the audio equipment switched on and are all the components connected properly? (Refer to the
manuals for your audio equipment.)
IMAGE
AND SOUND
•
Is the disc scratched?
NOTE:
Electrostatic discharge can cause unexpected problems. For example, causing the unit to fail to react to operation of the
buttons. In such an event, you should reset the unit by disconnecting it from the household wall outlet.
WARNING:
IF
YOU
ARE UNABLE
TO REMEDY
A PROBLEM BY
ABOVE MENTIONED HINTS, CONTACT THE PROVIDED
HELPLINE DETAILS. UNDER
NO CIRCUMSTANCES SHOULD
YOU
TRY
TO REPAIR
THE SYSTEM
YOURSELF,
AS
THIS
WILL INVALIDATE
YOUR
WARRANTY.
39
