Tetra Pak COMET RC, Manual

Page: 28 / 118

CRC804BF
6-3
Tetra Pak
Hoyer
6.2 Cone production equipment
6.2.1 Cone feed station
The function of the cone feeders (Fig. 6.2) mounted
at the end of the machine is to deposit the cones in
the slots in the lamellas. This action is synchronised
with the movement of the trays.
The cone feeder consists of a magazine (Pos. 1,
Fig. 6.2) in which cones must be placed manually,
and a cone dispenser driver by pneumatic actuators.
The station is activated by the cone feed switch (Pos.
11, Fig. 6.11) on the control panel.
6.2.2 Gauge station
The gauge is fixed on the up/down slide. Loosen
the screws (Pos. 1/2, Fig. 6.3) to adjust its height
and centred it over the slots, tightening the screws
again afterwards.
Fig. 6.3
6.2.3 Chocolate spray station
The sprayer is fixed on the up/down slide. Loosen
the screws (Pos. 1/2, Fig. 6.4) to adjust its height
and centred it over the slots, tightening the screws
again afterwards.
Its travel must be adjusted to control the entry of
the chocolate spray nozzle into the cone.
The station is turned on using the cone feed switch
(Pos. 13, Fig. 6.11) on the control panel.
Fig. 6.4
2
1
3
2
1
3