Tetra Pak COMET RC, Manual

Page: 22 / 118

CRC910B E
5-7
Tetra Pak
Hoyer
5.2.10 Cup lid closing station adjustment
Check that the lid pressing plate (Pos. 1, Fig. 5.11)
presses the lid in the cup in such a manner that it
closes off the cup perfectly (Pos. 2, Fig. 5.11). If it
is not closed off correctly, adjust plate height and
centre it over the slot by loosening the screws (Pos.
3/4, Fig. 5.11), remembering to tighten them again
afterwards.
Fig. 5.11
5.2.11 Lid sealing station adjustment
The sealing head is fixed to the raise/lower slide. It
can be centred over the lid by loosening the screw
(Pos. 1, Fig. 5.12); tighten the screw again when
finished.
Adjustment is important for correct sealing.
A control (Pos. 4, Fig. 5.17) on the operator
control panel may be used to adjust the temperatu-
re of the sealing head (press “F” and then press + to
increase temperature or – to decrease it).
Fig. 5.12
3
1
4
2
1