Tetra Pak COMET RC, Manual

Page: 14 / 118

CRC804BD 4-2
Tetra Pak
Hoyer
4.1 Transporting packages
The simplest way to move the crate in which the
Hoyer Comet RC filler is supplied is to use a pallet
truck or lift truck. The crate should be deposited as
close to the place of installation as possible.
Fig. 4.1
When the crate has been positioned correctly,
unpack as follows:
a. Remove the nails in the lid and remove it. Do
the same thing with the side panels. Pay particular
attention to the wooden spacer blocks located
between the sides of the crate.
b. Remove the spare parts box and other
components from the crate.
c. Remove the nails in the wooden blocks that hold
the machine in place during transport and remove
the cellophane sheet.
d. Check that the contents of the crate correspond
to the description given in the shipping
documents.
4.2 Unpacking and delivery checks
e. Check that all the covers and panels have been
correctly fitted and that there are no loose parts.
f. Visually inspect all the electrical components to
make sure that they are not damaged.
g. If any part/component is missing, stop unpacking
and immediately notify Tetra Pak Hoyer.
h. If the machine has been damaged during transit,
notify the insurance company immediately. Do
not proceed with unpacking until you are
authorised to do so.
All information required to identify the contents of
the crate is marked on the outside of the crate:
-
addresses of buyer and sender
- dimensions: length – width – height
- gross weight, net weight, tare
- packing list plate