Document 57.4400.7200 - 1
st
Edition 03/2005
INDEX
4
4
TELELIFT 3713 Elite - 4017 - 4514
SCHEDULED MAINTENANCE PROCEDURES
4.3
TABLE A PROCEDURES
A-1
CHECK THE OIL LEVEL WITHIN
REDUCTION GEARS, POWER DIVIDER
AND DIFFERENTIAL GEARS
To check the oil level within the
wheel reduction gears
:
-
Stop the machine on a level ground and ensure the
parking brake is engaged and plug
A
finds on the
horizontal axis.
-
Clean the plug all around, then remove it and check
if oil is level with the hole.
-
If necessary, add new oil through hole
A
until it is
level.
-
Refit the plug.
Place a container of suitable size under the plug.
To check the oil level in the
front and rear differential
gears
:
-
Stop the machine on a level ground and engage the
parking brake.
-
Loosen level plug
A
and check if oil is level with the
hole.
-
If necessary, top-up through hole
B
until oil comes
out from hole
A
.
-
Refit and tighten plugs
A
and
B
.
Place a container of suitable size under the plug.
A
A
A
C
B
Summary of Contents for TELELIFT 3713 Elite
Page 4: ...Courtesy of Crane Market...
