Document 57.4400.7200 - 1
st
Edition 03/2005
INDEX
4
46
TELELIFT 3713 Elite - 4017 - 4514
SCHEDULED MAINTENANCE PROCEDURES
D-6 CHANGE THE HYDRAULIC OIL FILTER IN
THE TANK
To change the hydraulic oil filter cartridge of the service
circuits, proceed as follows:
-
Stop the machine on a level ground and engage the
parking brake.
-
Place a container of suitable size under the tank, then
allow oil to flow out until its level is under the
inspection hatch
A
(90 litres approx).
-
Remove the inspection hatch and unscrew the oil
filter fitted inside the tank.
-
Check the tank is clean, then fit a new filtering
element and refit the inspection hatch.
-
Check the oil level within the tank. Add new oil, if
necessary.
Hydraulic oil filter canisters cannot be cleaned or
washed and refitted.
They must be replaced with new ones of the type
recommended by the manufacturer:
Flow rate l/1’ = 100
Filtering = 60
µ
Coupling = 2” NPT
The handling and disposing of used oils may be ruled
by local or national regulations. Address to
authorised centres.
When changing the oil, drain it when it is still hot
and the polluting substances are in suspension.
A
Summary of Contents for TELELIFT 3713 Elite
Page 4: ...Courtesy of Crane Market...
