Document 57.4400.7200 - 1
st
Edition 03/2005
INDEX
4
20
TELELIFT 3713 Elite - 4017 - 4514
SCHEDULED MAINTENANCE PROCEDURES
A-20 MAKE SURE THE SAFETY DEVICES
INSTALLED ARE IN EFFICIENT WORKING
ORDER
■
Checking the emergency stop pushbutton
(at every use)
To check the efficiency of this pushbutton, simply
press it down during a movement. The pressure of the
pushbutton shall cause the movement to stop and
the engine to shut down.
■
Checking the joystick pushbutton
(at every use)
To check if the pushbutton on the control lever is in
efficient working order, it will be enough to attempt to
operate the lever without pressing this button.
In this condition, the lever shall not operate any
movement. Should that not be the case, contact the
TEREXLIFT Technical Service.
■
Checking the limit switches of the outriggers
(at every use)
To check the limit switches of the outriggers:
•
Lower the outriggers to the ground and attempt to
engage a gear.
If the gear can be engaged, contact the Terexlift
Technical Service Centre.
Proceed on one outrigger at a time.
•
With the outriggers up, light
8
on the load limiter
panel must be off; with the outriggers down to the
ground, the same light must be on. Should it not be
the case, contact the Terexlift Technical Service.
Summary of Contents for TELELIFT 3713 Elite
Page 4: ...Courtesy of Crane Market...
