manualshive.com logo in svg

Terex RMX HI-RANGER, Operator'S Manual

The Terex RMX HI-RANGER Operator's Manual is essential for safely operating and maintaining your equipment. Download the free manual from manualshive.com to understand all the features and functionalities of the Terex RMX HI-RANGER. Ensure optimal performance and safety by following the guidelines outlined in the manual.

Share
Download
background image

RMX SERIES

t o c - 2

4 8 3 0 1 8   -   3 / 1 5

T e r e x  S o u t h  D a k o t a

R M X  S e r i e s

JIB & WINCH OPERATION (OPTIONAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 21

HYDRAULIC JIB EXTENSION (OPTIONAL)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 22
DETERMINING LIFT CAPACITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 23
AVOID TRAPPED LOOPS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 24
CONDUCTOR LIFTING (OPTIONAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 24
PHASE LIFTERS (OPTIONAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 24
LOWER BOOM LIFTING ATTACHMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 25

BOOM LIFTING EYE MATERIAL HANDLING (OPTIONAL). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 26
PERSONNEL AND TRAINING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 27
PRE-OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 28

DAILY PRE-OPERATION CHECKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 28
JOB SITE SURVEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 30
OPERATING TEMPERATURE RANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 30
WIND SPEED  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 30
JOB SITE SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 31
SETTING THE OUTRIGGERS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 33
SETTING UP ON A SLOPING SURFACE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 34
SETTING UP ON A SOFT SURFACE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 35
SETTING UP FOR OPERATION ON SNOW AND ICE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 36
OUTRIGGER / UNIT CONTROL SELECTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 36
BOOM INTERLOCK  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 36
TORSION BARS (OPTIONAL)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 37
STABILITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 37

OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 38

BOOM OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 38
UNSTORE THE BOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 38
AERIAL OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 39

EMERGENCY OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 42

POWER LINE CONTACT ON GROUND  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 42
TOP CONTROL AND OPTION SHUT OFF  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 44
MANUAL ROTATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 44
AUXILIARY LET DOWN POWER (OPTIONAL)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 44

HYDRAULIC LINE FAILURE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 45

ENGINE FAILURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 47
HYDRAULIC PUMP FAILURE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 47
CONTROL VALVE FAILURE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 47

OPERATIONAL LIMITATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 47

PLATFORM LEVELING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 47
LEAVING THE JOB SITE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 48

SECTION 2  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 1
MAINTENANCE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 1

PREVENTATIVE MAINTENANCE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 1

MAINTENANCE PROCEDURE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 1
ADJUSTMENTS AND REPAIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 1
LUBRICATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 2
GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 2

FREQUENT AND PERIODIC INSPECTION INTERVALS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 3

DAILY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 3
90 DAYS (360 HOURS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 3
180 DAYS (720 HOURS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 3
12 MONTHS (1,050 HOURS)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 3
5 YEAR (5,250 HOURS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 3

Summary of Contents for RMX HI-RANGER











































































































Reviews:

No comments

Related manuals for RMX HI-RANGER

MAHLE MCX-2 Operation Manual preview
MCX-2
Brand: MAHLE Pages: 21
FagronLab FG User Manual preview
FG
Brand: FagronLab Pages: 16
GE Ettan IPGphor 3 Instrument User Manual preview
Ettan IPGphor 3
Brand: GE Pages: 64
GE AMX 4+ Technical Publications preview
AMX 4+
Brand: GE Pages: 56
GE AMX 4+ Technical Manual preview
AMX 4+
Brand: GE Pages: 132
GE AKTAprocess Site Preparation Manual preview
AKTAprocess
Brand: GE Pages: 16
GE Logiq 500 Advanced Reference Manual preview
Logiq 500
Brand: GE Pages: 474
Yamaha A3000 Upgrade Manual preview
A3000
Brand: Yamaha Pages: 50
A&D PT Series Instruction Manual preview
PT Series
Brand: A&D Pages: 30
JB Systems Sirius Operation Manual preview
Sirius
Brand: JB Systems Pages: 7
3B SCIENTIFIC PHYSICS 1023095 Instruction Sheet preview
1023095
Brand: 3B SCIENTIFIC PHYSICS Pages: 36
3A HEALTH CARE HAPPYNEB III Instruction Manual preview
HAPPYNEB III
Brand: 3A HEALTH CARE Pages: 16
360 Systems Short/cut 2000 Audio Editor Specification preview
Short/cut 2000 Audio Editor
Brand: 360 Systems Pages: 4
ACE INSTRUMENTS WAVE Operating Manual preview
WAVE
Brand: ACE INSTRUMENTS Pages: 15
Wave Fitness Neptune Owner'S Manual preview
Neptune
Brand: Wave Fitness Pages: 15
DANLERS CEFL PIR Quick Start Manual preview
CEFL PIR
Brand: DANLERS Pages: 2
Haas Automation ST Manual preview
ST
Brand: Haas Automation Pages: 26
JB-Lighting Varycolor MICRO 150HTI User Manual preview
Varycolor MICRO 150HTI
Brand: JB-Lighting Pages: 18

Brands by name

Popular brands

Load more brands