RMX SERIES
1 - 4 0
4 8 3 0 1 8 - 3 / 1 5
T e r e x S o u t h D a k o t a
R M X S e r i e s
OPERA
T
ION GUI
D
ELI
N
ES
Do not allow any part of the Aerial Device to come in contact with any electrical
conductors, either energized or non-energized.
419264A
Platform personnel must wear an OSHA
FALLING FROM PLATFORM
DEATH OR SERIOUS INJURY
Platform doors, if provided, must be se-
approved fall protection system with
lanyard attached to anchor provided.
curely latched.
WILL RESULT IN
All metal at boom tip is electrically connected.
Operator contact with ANY, live or grounded, line or object
while operator touches CONTROLS or BOOM TIP COMPONENTS
and boom tip contacts any other line or object can result in
Plastic or fiberglass covers offer limited electrical insulation.
Covers are NOT tested, certified, or maintained as insulating.
DO NOT Depend on machine covers for insulation
Comply with OSHA, ANSI, & NESC requirements
Cover all lines with insulated line hose or insulating blankets
Wear Personal Protective Equipment: Fall protection; Eye protection;
Maintain proper CLEARANCE to all lines and objects
Insulating: gloves, sleeves, and hard hat; & Special clothing
ELECTROCUTION HAZARD
DEATH OR SERIOUS INJURY
CONTROLS ARE NOT INSULATED OR ISOLATED
463602A
ELECTROCUTION HAZARD
DEATH OR SERIOUS INJURY
NOT INSULATED
THIS MACHINE IS
Maintain safe clearance from electrical power
lines in accordance with applicable government
regulations. Allow for boom, platform, electrical
line and load line sway.
This machine does not provide protection from
contact with or proximity to an electrically
charged power line.
Boom and platform must be kept below all
electric power lines.
Do not use for work on electric power lines.
Will result from contact with or inadequate
clearance to electrical power lines and apparatus
419265A
