RMX SERIES
-V
R M X S e r i e s
T e r e x S o u t h D a k o t a
4 8 3 0 1 8 - 3 / 1 5
SA
FETY
1.
The use of this Aerial Device is subject to certain potential dangers that cannot be protected against by
mechanical means. Only the exercise of intelligence, care, and common sense can eliminate these
dangers. It is essential to have competent, careful operators who are physically and mentally fit, and
thoroughly trained in the safe operation of this Aerial Device. Learn, understand and practice safe use of
all equipment and controls - before operating this Aerial Device.
2.
Never exceed the rated load capacity. Know the total weight - including the operator, platform liner, tools,
and equipment, and/or other items before entering platform.
3.
Conduct a thorough pre-operation of the machine and test all functions through their complete cycle
before each work shift. Immediately tag and remove from service a damaged or malfunctioning
machine.
4.
Do not operate this Aerial Device if any interlock or safety device is malfunctioning.
5.
Do not bypass or remove any interlock or safety device.
6.
Never operate with damaged leveling chain or components.
7.
Stop in position if you become aware of any dangerous conditions or hear any unusual noise (such as
grinding, cracking or grating) while operating the Aerial Device. Do not move the Aerial Device until the
problem has been resolved.
8.
Do not operate the Aerial Device if it is not functioning properly or a leak is detected. Repair, document
repairs performed and inspect the unit before returning to service.
9.
Never operate from the ground controls with personnel in the platform. Operation must be controlled by
the platform operator, except in case of an emergency.
10. Keep your Aerial Device control area free of obstructions that may interfere with control operation or
physical access to the controls.
11. All ground personnel must be trained in the proper procedures to follow in case of emergency.
12. Do not operate the Aerial Device in an electrical storm.
13. The hydraulic fluid is petroleum based and is flammable.
14. Perform all required maintenance.
GENERAL SAFETY GUIDELINES
