RMX SERIES
1 - 1 8
4 8 3 0 1 8 - 3 / 1 5
T e r e x S o u t h D a k o t a
R M X S e r i e s
OPERA
T
ION GUI
D
ELI
N
ES
PLATFORM TILT
The platform leveling system permits the platform to be tilted to clean out water and debris. It also allows the
platform to be tilted for personnel rescue. The control may be located at the upper controls and lower
controls.
To tilt platform the lower boom must be raised fully and the upper boom folded to get close to the ground
(operate from lower controls only).
When using the tilt function do not get in the platform. Operate from the upper controls only while standing
on the ground alongside the platform or from the lower controls.
TILTING OPERATION
1.
Rotate the platform to its stowed position alongside the boom.
2.
Move the control selector at the lower controls for the appropriate control.
3.
Position the platform to position shown so the platform is close to the ground.
4.
Check for obstructions or people before moving the platform.
5.
Move the leveling control as shown to dump the platform for the selected boom position from the lower
controls of while standing alongside the platform.
6.
Return the platform to level position before moving the booms.
NOTE: Return the platform to level before moving the booms to prevent air forming in the
leveling system.
Do not allow anyone to tamper with the platform tilt device while occupants are in the
platform. Serious personal injury or death could result from platform upsetting.
Do not tilt platform with personnel in the platform.
