RMX SERIES
2-3
R M X S e r i e s
T e r e x S o u t h D a k o t a
4 8 3 0 1 8 - 3 / 1 5
MAINTENANCE GUIDELINES
FREQUENT AND PERIODIC INSPECTION INTERVALS
DAILY
1.
Check controls at platform and lower controls for proper operation.
2.
Inspect fall protection equipment and attachments.
3.
Inspect visual and audible devices.
4.
Check cleanliness and dryness of fiberglass components.
5.
Visually check for missing, damaged, or loose covers and guards.
6.
Check for missing and illegible warning, operational, or instructional markings.
7.
Visually check oil level in hydraulic reservoir.
8.
Visually inspect for leaks in hydraulic system.
9.
Visually check all cylinders for leaks.
10. Visually inspect leveling system. (Chains and Insulator Assemblies)
11. Visually inspect all fasteners for tightness.
12. Visual inspection of all structural members for cracks and permanent deformation.
13. Check for rotational obstructions.
14. Visual inspection of all electrical wires.
15. Operational test of all boom functions.
16. Visual inspection of winch line and hooks.
90 DAYS (360 HOURS)
1.
Check tension on leveling system.
2.
Visually inspect all sprockets, chains, pulleys and pins.
3.
Lubricate all points per lubrication chart recommendations.
4.
Apply lubricant to rotation gearbox pinion and turntable bearing.
5.
Repair or replace items found to be worn or damaged.
6.
All Daily Items
180 DAYS (720 HOURS)
1.
Inspect exposed hoses.
2.
Clean hydraulic tank breather.
3.
Check tightness of rotation bearing bolts, turntable to bearing, and bearing to pedestal for proper torque.
4.
Replace return filter.
5.
Daily and 90 day (360 hours) inspections.
12 MONTHS (1,050 HOURS)
1.
Replace high-pressure filter.
2.
Inspect and lubricate PTO drive shaft to pump.
3.
Take samples of hydraulic oil and test.
4.
Check all system pressure for proper setting.
5.
Perform cylinder drift tests.
6.
Perform structural and critical weld inspections.
7.
Perform dielectric tests.
8.
Daily, 90 days (360 hours) and 180 days (720 hours) inspections.
5 YEAR (5,250 HOURS)
1.
Remove leveling chain and leveling rods for inspection.
2.
Daily, 90 days (360 hours), 180 days (720 hours) and 12 months (1,050 hours) inspections.
