RMX SERIES
-IX
R M X S e r i e s
T e r e x S o u t h D a k o t a
4 8 3 0 1 8 - 3 / 1 5
SA
FETY
20. Use only non-metallic tool holders and tool trays.
21. Never use leather work gloves or bare hands on grounded conductors when energized conductors are
on the same structure. Wear insulating rubber gloves with leather protectors.
22. Do not lift conductors with the boom tip or platform. Use lifting device with appropriate attachments.
23. Do not bring any conductive object from outside the platform to the inside of the platform. This includes
extension cords, guy wires, or conductors. They will eliminate all insulation the machine offers the
operator.
24. Do not operate controls while standing on the ground or other structure with booms elevated from stored
position. Operating the machine while standing on the ground or other structure could result in
electrocution.
1.
When working from the platform, only use hydraulic tools equipped with orange hoses marked NON-
CONDUCTIVE. The hoses must be kept clean and dry and must be inspected periodically.
2.
All accessories must be inspected, maintained and operated with the same care and safety rules that
apply to the Aerial Device.
3.
Do not use hoses having less than 3000 PSI (20.69 MPa) working pressure ratings.
4.
Tools selected for use with this Aerial Device should be closed-center type and operate satisfactorily at
2250 PSI (15.51 MPa) and 8 GPM (30 LPM).
5.
If this Aerial Device is equipped with a boom lifting eye, the boom position and lifting capacity must not
be exceeded.
6.
Personnel or load shall not be allowed in the platform when utilizing the boom lifting eye.
7.
If this Aerial Device is equipped with platform tilt, an inspection must be made before entering the
platform, to insure all locks and pins are properly in place.
8.
Do not place booms or platform under trees or limbs while trimming to avoid possible damage or
overloading.
9.
Do not operate hydraulic hand tools on high speed for an extended period of time without stopping.
Continuous operation can cause overheating and possible damage to the hydraulic system.
10. Do not use lower hydraulic tools when platform or booms are near energized lines.
ACCESSORIES
