35
ã
Terberg Machines B.V. IJsselstein, The Netherlands
All rights reserved. No part of this book may be reproduced, stored in database or retrieval system, or published, in any form or in any way,
electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from the publisher.
5.12 Safety provisions
5.12.1 General
If it is noticed that the bin lift system does not work or has a fault while collecting refuse, the workshop or
service station must be informed immediately with a clear description of the defect.
- Do not remove bins/containers until the bin lift has come to a standstill.
- Put empty bins/containers where they will not cause a danger to other road users.
- Do not accept damaged bins/containers.
- Do not empty bins where the lid is not closed properly.
- Warning and operating decals that are no longer legible must be replaced.
5.12.2 Emergency stop button
The emergency stop buttons positioned on both sides of the bin lift allow you to stop the bin lift cycle and the
compactor immediately
in the event of an emergency
.
After the emergency stop button has been pressed the flow of hydraulic oil is stopped and the electric circuit is
interrupted.
The check lights for automatic working go out. The driver of the refuse collection vehicle is warned by a buzzer
in the cabin that the emergency stop button has been pressed.
EMERGENCY STOP BUTTON
Repairs may only be carried out by qualified
personnel, never rectify faults yourself, this
may cause danger for you and damage to the
bin lift system!