17
ã
Terberg Machines B.V. IJsselstein, The Netherlands
All rights reserved. No part of this book may be reproduced, stored in database or retrieval system, or published, in any form or in any way,
electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from the publisher.
4.8 Electrical connection to compactor body: Omni
DEL and OmniDEL e
The connection between the bin lift and the body of the refuse collection vehicle is in accordance with
standard EN 1501-5.
Check the following points before making the connection:
- Start the vehicle and switch on the compactor.
- Press the compactor system start button.
The compactor must now operate as a “hold to run” system; as soon as the start button of the
compactor installation is released the compactor must stop.
- Check that the emergency stop switches of the compactor installation are working properly and that the
emergency stop buzzer in the cabin also works.
- Reset the emergency stop switches and check again that the compactor works as a “hold to run” system.
- Separate the 16-pole plug from the 16-pole fixed socket.
- Connect the body plug into the fixed socket on the bin lift.
- Connect the bin lift plug to the fixed socket on the body.
Electrical plugs and socket boxes
Make sure that the work area of the compac-
tion mechanism is sufficiently protected.
The following work may only be carried out by
qualified personnel.
