DE0-CV User Manual
23
www.terasic.com
May 4, 2015
Figure 3-7 Connections between the slide switches and Cyclone V FPGA
User-Defined LEDs
There are also ten user-controllable LEDs connected to FPGA on the board. Each LED is driven
directly by a pin on the Cyclone V FPGA; driving its associated pin to a high logic level turns the
LED on, and driving the pin low turns it off.
Figure 3-8
shows the connections between LEDs and
Cyclone V FPGA.
Table 3-2
,
Table 3-3
and
Table 3-4
list the pin assignment of user push-buttons,
switches, and LEDs.