Snappi Seat Standalone Workshop Manual
Document No: 053-08 v2
Page 41 of 49
March 2019
Snappi Seat Standalone Workshop Manual.doc
9: Convert a Snappi Minimiser to a Standard Seat:
All Snappi minimiser seat units come supplied with a set of standard brackets / covers to
provide maximum growth. The following instructions detail how to switch from the minimiser
kit to the standard supports.
Fig 9.1: Parts for standard conversion
1. 1 x Standard Back Pad
2. 2 x Standard side wing covers
3. 2 x Standard side wing plates with m5 x 16 socket button bolts and M5 nylock nuts
4. *Optional* M8 x 25 coach bolts (only supplied if the seat has lateral trunk supports or
lateral head wings)
5. *Optional* M8 Washers (only supplied if the seat has lateral trunk supports or lateral
head wings)
1
2
3
4
5
