Snappi Seat Standalone Workshop Manual
Document No: 053-08 v2
Page 16 of 49
March 2019
Snappi Seat Standalone Workshop Manual.doc
7.4: Footrest Parts:
If a complete footrest assembly is ordered, it comes supplied with footrest slide with the tray
pre-assembled, footrest stems and the angle adjustors. For information on fitting these
please refer to the instructions given in section 7.3 (for the angle adjustors), and 7.4.1 (for
the stems) and 7.4.3 (for the slide ad tray assembly) below.
7.4.1: Footrest Stems:
To replace the footrest stems:
Fig 7.4.1.1
Remove the seat unit from the chassis and
place it on its back on a flat surface (see Fig
7.4.1.1).
Unscrew the self-tapping screws from the
end of the old footrest stems as shown (see
Fig 7.4.1.2).
Fig 7.4.1.2
