Snappi Seat Standalone Workshop Manual
Document No: 053-08 v2
Page 21 of 49
March 2019
Snappi Seat Standalone Workshop Manual.doc
Fig 7.5.7
Left: The rear bar fitted into the cover (see
Fig 7.5.7).
Next, fit the ‘large teeth’ canopy adjustor
onto the end of the front bar as shown (see
Fig 7.5.8, right). Push the adjustor onto the
end of the rod until the hole in the adjustor
lines up with the square cut out in the end of
the rod.
Fig 7.5.8
Fig 7.5.9
Take the coach bolt and push it through the
frame bar and adjustor so that the square
neck of the bolt fits into the square cut out in
the bar. Take the spring and push onto the
other end of the bolt so that the large end of
the spring fits over the mounting point on the
adjustor as shown (see Fig 7.5.9, left).
