Snappi Seat Standalone Workshop Manual
Document No: 053-08 v2
Page 37 of 49
March 2019
Snappi Seat Standalone Workshop Manual.doc
Fold the front edges of the seat cover down
over the 1” pad so that it attaches to the loop
strips on the front of the seat base as shown
(see Fig 8.30, right).
Fig 8.30
Fig 8.31
Slide the original hip guide covers back over
the hip guide plates and clip onto the
poppers at the back of the plate as shown
(see Fig 8.31, left).
Degrease the foot plate with a little white
spirit then clean with a dry cloth.
Remove the backing tape from the hook /
loop strip on the back of the footrest pad as
shown (see Fig 8.32, right).
Fig 8.32
Fig 8.33
Press the foot pad firmly down onto the foot
plate so that the hook / loop strip adheres to
the plate.
