Snappi Seat Standalone Workshop Manual
Document No: 053-08 v2
Page 25 of 49
March 2019
Snappi Seat Standalone Workshop Manual.doc
8: Fit the minimiser kit to the Snappi Seat:
The following instructions are for fitting a minister kit to a pre-supplied seat, and should only
be carried out by a competent tradesperson.
Fig 8.1: Minimiser kit components
1.
1 x 2” back pad
2. 2 x loop strips
3.
1 x 2” foot pad
4.
1 x 1” seat pad
5. 1 x Extended back cover
6. 2 x extended side wings
7. 2 x extended side wing covers
8. *Optional*: M8 x 70 coach bolts (supplied if the seat includes lateral trunk supports or
lateral head wings)
9. *Optional*: M8 x 50mm spacers (supplied if the seat includes lateral trunk supports or
lateral head wings)
10. 8 x M5 x 16mm socket button bolts (not shown)
11. 8 x M5 Nylock Nuts (not shown)
1
2
3
4
5
6
7
8
9
