Snappi Seat Standalone Workshop Manual
Document No: 053-08 v2
Page 6 of 49
March 2019
Snappi Seat Standalone Workshop Manual.doc
The following items should be fitted to the seat as standard:
Item
Component
QTY.
Yes
No
5
Hip guide covers
2
6
Seat Base Cover
1
7
Seat Back Cover
1
8
Side Pads
2
Please note, accessories such as lateral supports or harnessing that were ordered at the
same time as the seat will be included in the main package.
Larger accessories will be packaged in separate cartons (e.g. the rain cover).
IMPORTANT:
❖
If any items are damaged or missing, then please contact Tendercare, preferably by email at
or alternatively please call us on (01903) 726161 within 36 hours of
delivery.
After unpacking and checking you have all components and they are in good condition
dispose of the packaging at your local recycling centre. Alternatively retain and reuse.
3: Tools and Torque Settings
The following tools are required to dismantle, reassemble and repair the seat:
Spanners and sockets:
8mm, 10mm, 13mm
Hexagon Keys:
3mm, 4mm, 5mm and 6mm
Torque Wrench:
Range 0 to 25 Nm
Screwdrivers:
2 small flat blade screwdrivers
Torque Settings if not specified:
Spanner Size (mm)
Torque (Nm)
8
10
10
15
13
25
