OLT6 and 1134 Description Installation and Turnup Guide
Page 44 of 50
|
IPv4 Configuration
|
|
IP Address
: 192.168.1.201
|
|
Network Mask
: 255.255.255.0
|
|
|
|
IP Static Route Configuration
|
|
Default Gateway
: 192.168.1.1
|
|
|
|
Element Management
|
|
Admin State
: Enabled
|
|
IP Stack Type
: IPv4
|
|
VLAN Priority
: 7
|
|===========================================================================================
====|
Apply this Element Management configuration(may trigger a restart): (y/n)
...................[n]: _
If you made a mistake during Turnup, enter
N
at this prompt and the wizard will
terminate without applying the turnup data entered. You can then relaunch the
wizard to correct any mistakes. The next attempt should be faster as the wizard will
use the responses from the last execution as defaults in each prompt.
Once these steps have been completed, the OLT should be added to the Panorama
EMS as defined in the next step.
