OLT6 and 1134 Description Installation and Turnup Guide
Page 40 of 50
logout
- Exits this craft session
mcast
- Displays downstream multicast info
mccount
- Statistics on all multicast channels
menu
- Launches the menu interface
mstibstat
- Display MSTI Bridge Parameters/Status
msticonfig
- Read MST Configuration Identifier
mstilist
- Display Currently Created MST instances
mstipstat
- Display MSTI Port Parameters/Status
ne
- all network element related commands
ont
- all ONT interface related commands
passwd
- Allows user to change their password
ping
- Sends ICMP ping packets to a node
portmirroring
- Mirror traffic to select port
portstat
- Display Spanning Tree Port statistics
profile
- all profile related commands
resetdefaults
- Restore ESU to factory defaults
resetpasswd
- Allows Admin user to reset a users' password to a known value
rtpmon
- Starts/stops RTP monitoring
rtpstat
- Displays RTP info gathered by RTPMON
sfpinfo
- Displays the status of optical interfaces
stopuser
- Stops all login sessions for the user
stpconf
- Display Spanning Tree configuration
swinv
- Displays software inventory
switchloads
- Switch to Standby load
template
- all template related commands
trunkconf
- Displays info on uplink trunk (aggregated Ethernet links)
trunkstat
- Displays status of uplink trunk (aggregated Ethernet links)
userinfo
- Allows Admin user to see all user info
version
- VERSION - Show the current version of software
vlan
- vlan profile related operations
whereami
- Displays location of this card within the NE
WIZard
- Run available Wizards (e.g. ElementManagement(aka Turnup),...)
ESU32>
The CLI displays the available commands, options, parameters and help (for the
current context) whenever
?
is typed. A
?
may be typed at any point within a
command to display the remaining parameters and options relevant to the current
command.
·
At the command prompt, enter the command
wiz em tn rn
and press
Enter
.
This is an abbreviated form of the command:
wizard element-manager turnup run
This command executes the Turnup Wizard which will collect the data required to
perform the OLT turnup. Below is an example of the Turnup Wizard execution:
ESU32> wiz element-management turnup run
Do you want to proceed with turnup configuration: (y/n)............................. [Y] : y
Uplink Interface Configuration:
