OLT6 and 1134 Description Installation and Turnup Guide
Page 22 of 50
1.4.3. AC Power Installation
This section gives instructions for when AC Power is being utilized for powering the
OLT6/1134 system.
The OLT6/1134 AC requires the AC-DC rectifier(s) to be installed in the rear of the unit.
Use the following procedure to install the redundant AC-DC rectifiers.
Note:
The OLT6 can accommodate two rectifiers configured to support redundant
powering.
1. Locate the package containing the rectifier/power supply.
2. Open the package and examine the rectifier for any apparent damage.
3. If damage is noted, do not proceed and contact TAC or your Tellabs sales
representative for a replacement unit.
