tell Pager4 2G.IN4.R2, Installation And User Manual

Page: 73 / 85

73
Counters :

System time : the system date and time.

IP uptime : elapsed time since the device has last connected to the Internet.

Device uptime : elapsed time since the device has been powered up.

GSM uptime : elapsed time since the device has last connected to the GSM network.

Data traffic : data traffic since the device has last connected to the Internet.
Network :

GSM operator : the name of the GSM operator used actually.

Data connection type : type of actual data connection.

GSM signal : actual GSM signal level (None/Very low, Weak, Medium, Good, Excellent).

WiFi network (WiFi model only): the name (SSID) of the network to which the device is
connected

Signal (WiFi model only): the signal level (None/Very low, Weak, Medium, Good, Excellent)
of the network to which the device is connected.

Searching for WiFi networks (WiFi model only): network scanning status (Yes=scanning
is in progress).

IP address : the actual IP address of the device.

Number of connections : the number of active connections with servers/receivers.

Modem status : the actual status of the GSM modem.

Cloud connection : the cloud connection status.
Inputs / Outputs :

IN1…IN4/IN6
: the actual state of the contact inputs.

Output1/Output2 : the actual state of the output(s) (OUT1/OUT2)
Reporting channels :

IP1…IP4
: connection status of the configured servers and IP receivers
When connected to the device locally or remotely, the following options will be available:

Query :
This button appears in case of remote connection only. By clicking on it, status
information will be downloaded from the device. This is not needed for USB
connection, since in that case the data is downloaded automatically.

Arm :
The device can be armed by clicking on this button. This option is not available if the
“
Always armed
” or “
Bistable contact
” option is selected at the “
Arming / Disarming
options
” in the “
General
” settings menu.

Disarm :
The device can be disarmed by clicking on this button. This option is not available if
the “
Always armed
” or “
Bistable contact
” option is selected at the “
Arming /
Disarming options
” in the “
General
” settings menu.

Send test report :
You can generate a periodic test report event by clicking on this button.