85
8.2 Restoring the factory default settings using the reset button
Power up the device.
Long press the reset button for at least 8 seconds,
and then release. The reset button is placed on the
electronic board, near the corner of the SIM card
holder, closed to the status LED (see the picture on
the right hand side). It is easier to access the button
if you open the SIM card holder.
After releasing the button, the status LED will show
permanent red light first, and then flashing red light,
until the device creates the clean configuration.
This process may take up to 1 minute.
In the meantime you can install the SIM card and
close back the SIM card holder.
The reset process has completed when the device has connected to the GSM network and
the status LED shows a flashing green light.
9 Package content
Pager4
+ terminal connector
GSM or WiFi antenna (depending on the product model)
Quick start guide
Warranty card
10 About the manufacturer
Company
:
T.E.L.L. Software Hungária Kft
Address
:
4034 Debrecen, Vágóhíd u. 2., Hungary
Website
:
