LCD 63SE (VG) Keypad
User Manual
9
LCD 63SE (VG) Keypad operation
Arming of partition A
The system can be ARMED when the icon is displayed on the LCD and the icon for Partition A
is ON .
noTE: The ArMInG sequence depends on the programmed parameters in the Engineers
menu! Ask your installer which of the described below ArMInG variants you have to use!
“Full ArM” Mode for partition A
Full arming means all zones are secured . Anyone coming into the entrance zone is required to enter
a valid code* . Otherwise an alarm will be generated after the entrance time is over .
ARMING VARIANT 1
for “Full ARMING” of Partition A (with choosing the type of the ARMING
Mode - default setting):
ARMING VARIANT 2
for “Full ARMING” of Partition A (without choosing the type of the ARMING
Mode - programmed from the installer):
ARMING VARIANT 3
for “Full ARMING” of Partition A (quick ARMING without user code, but with
choosing the ARMING Mode type - default setting):
ARMING VARIANT 4
for “Full ARMING” of Partition A (quick ARMING without user code and
ARMING Mode type - programmed from the installer):
At the end of the “Full ARM” procedure, regardless of the used
arming variant, the icons of “Partition A”, “door” and “clock” are
ON .
* To the user code are assigned rights to operate with Partition A, otherwise the system will reject
the operation.
code
*
exit
time
code
*
exit
time
exit
time
exit
time
