LCD 63SE (VG) Keypad
User Manual
15
Memory LoG review from User
To review the memory LOG file the user has to enter a valid code:
To view the code, the time and the date of the event use the following buttons:
Example:
There has been an alarm event in the 4
th
zone at 21:08h - this is the first information
displayed on the LCD screen. Press the
button to see the day and month of happening of the
event - December, 10
th
. Press the
button - the first two digits are the event code number (check
it in the Appendix: Table of events on page 22), the next two digits (blinking) are showing the zone/
user number respectively.
Chime Enabling / Disabling from User
To turn the chime mode on or off the user is required a personal code . Pressing any numeric key
switches alternatively the chime mode on and off . Pressing
confirms the selection.
By default the chime is disabled .
Turning the chime ON and OFF key sequence:
Zone Bypassing by User
To execute bypass operation the user is required a personal code . Pressing a numeric key bypasses
the respective zone . The zone number is surrounded by the “(
-
)” icon . Pressing the same key once
again restores the zone bypass . The “(
-
)” icon is removed . Pressing
confirms the selection.
Bypassing key sequence
(zone 2 in the example)
:
-
previous event,
-
following event
code
code
the chime is
disabled
the chime is
enabled
confirm
code
zone 2 is not
bypassed
zone 2 is bypassed
confirm
