LCD 63SE (VG) Keypad
User Manual
19
To change his code the manager is required to enter his current manager code before changing it .
Numbers in brackets (3), (4), (5) and (6) are ON to indicate the number of code digits left to be
entered .
Note:
If 6-digit codes are used in the system, then numbers (1), (2), (3), (4), (5) and (6) are ON.
If the
new code is repeated correctly the system will confirm it with a sound signal and will exit automati
-
cally from the Manager programming menu .
Changing of Manager rights
To change his rights the manager is required to enter his current manager code .
Pressing a numeric button alternatively switches over the state of the respective manager’s right
from disabled to enabled . The display indicates the respective operations the manager is allowed to
execute . The numbers in brackets indicate the permitted operations .
The selected programming is confirmed by pressing the
button .
* Default settings for Chief Manager in the system. For sub-managers No 1, 2 and 3
there are no
programmed rights by default
.
NOTE:
Disabling all manager rights will automatically erase the
programmed code combination!
Memory LoG review from Manager
To review the memory LOG of events the manager is required to enter his code .
See also the example on page 15 .
Chime Enable / Disable from Manager
To enter enable/ disable chime mode, the manager is required to enter his code .
code
2 beeps
2 beeps
Manager
Address 2x
new code
new code
4 or 6
digits
repeat
code
Manager
Address 2x
-
previous event,
-
following event
code
LCD
Manager rights
(5)
Working with Partition A*
(6)
Working with Partition B*
code
2 beeps
