background image

LCD 63SE (VG) Keypad 

User Manual 

Example: 

The Partition A is ready to be armed - the icon “A” lights on. The 

Partition B is in “Stay ARM” mode - the icons “clock”, “door” 

and “man” light on. Zones 9 and 10 are bypassed - only the 

brackets are visible.

 Icons for Status of the control panel

The status of the control panel is visualized with the following icons:

Icon

Indication

Description

ON

The battery of the control panel works properly .

 

 

Blinking

The  Battery  of  the  control  panel  is  at  low  charge  or  is  missing;  blinks 

together with the 

 icon .

ON

Power supply 220 VAC .

Blinking

Power supply 220 VAC lost .

Blinking

Technical trouble in the system - see page 14 .

ON

Memory events LOG - see page 15, 19 .

ON

The system is ready to be armed .

Blinking

Programming mode .

Animation - 

gun firing

BURGLAR  alarm

  event  in  the  system  -  the  gun  is  firing  towards  the 

house . 

TAMPER alarm

 in the system - the gun is firing towards the house and 

the 

 icon is blinking . 

The icon (A or B) of the partition in burglar / tamper alarm is blinking .

Animation - 

flames over 

the house

FIRE  alarm

  event  in  the  system  -  the  flames  are  blinking  over  the 

house . 

The icon (A or B) of the partition in fire alarm is blinking.

Summary of Contents for LCD 63SE

























Reviews: