16
LCD 63SE (VG) Keypad
User Manual
ATTEnTIon! To bypass zones 10, 11 and 12 you have to use special button combinations:
• To bypass Zone 10 use button combination
+
.
• To bypass Zone 11 use button combination
+
.
• To bypass Zone 12 use button combination
+
.
Bypassing zone button sequence
(zone 12 in the example):
Manager’s programming Menu
General rules for programming parameters in the Manager’s Menu
Step 1:
Enter a valid user code →
4
or
6
digits
Step 2:
Single press the
prG
button →
Step 3:
Enter an address number →
(3 digits)
Step 4:
Change the parameter value
Step 5:
Confirm the change with →
button / or reject it with →
button
The blinking LEDs
“
ready
”, “
ArM
”, “
TrBL
” and “ ”
icon
show that the system is in programming
mode .
Changing User rights for remote Access
To change the user rights for remote access, the manager is required to enter his personal code .
Note:
Certain users may
not be permitted to bypass
zones in the system.
code
zone 12 is not
bypassed
zone 12 is bypassed
confirm
The display indicates the respective operations the user is
allowed to execute . The numbers in brackets indicate the
permitted operations . Pressing a numeric button alterna-
tively switches over the state of the respective remote ac-
cess right from disabled to enabled . The selected program-
ming is confirmed by pressing the
button .
* Default settings.
default settings
LCD
remote access rights
1
Remote DISARM
(2)
Remote ARM*
3
Remote Code Access
(4)
Remote Programming*
(5)
Remote LOG Review*
6
Remote Bypass
confirm
disabling the remote ArM
code
