10
LCD 63SE (VG) Keypad
User Manual
“Stay ArM” Mode for partition A
Stay arming means the user is allowed to stay in certain bypassed zone(s) after arming the system,
but the entrance zone is secured . Anyone coming into the entrance zone is required to enter a valid
code* . Otherwise an alarm will be generated after the entrance time is over .
The zone bypassing is described on pages 15 and 16 (user), and 19 (manager) .
Note:
Certain users may not be permitted to arm the system in “Stay ARM” mode.
ARMING VARIANT 1
for “Stay ARMING” of Partition A (with choosing the type of the ARMING
Mode - default setting):
ARMING VARIANT 2
for “Stay ARMING” of Partition A (without choosing the type of the ARMING
Mode - programmed from the installer):
ARMING VARIANT 3
for “Stay ARMING” of Partition A (quick ARMING without user code, but
with choosing the ARMING Mode type - default setting):
ARMING VARIANT 4
for “Stay ARMING” of Partition A (quick ARMING without user code and
ARMING Mode type - programmed from the installer):
At the end of the “Stay ARM” procedure, regardless of the used
arming variant, the icons of “Partition A”, “door” and “clock” are
ON . The icon “man” is ON in the Partition A . The number(s) of
the bypassed zone(s) are missing, only the brackets around them
are visible .
* To the user code are assigned rights to operate with Partition A, otherwise the system will reject
the operation.
exit
time
exit
time
exit
time
exit
time
code
*
code
*
