Box Contents –
This package contains
:
1- X-keys Device, 1- Installation CD, 1- Product Manual (this page), 2 - Vertical
Double-keys, 1 - Horizontal Double-key, 1 - Key-puller, 1- Blank Legend Sheet, 1 – Preprinted Legend Sheet.
X-keys USB Desktop – Quick Start
Run the installation program from the enclosed disc before plugging in your X-keys Desktop. After installation, the X-keys
MWII Icon
will appear in your Windows Taskbar. Plug in the X-keys and wait for Windows New Hardware Wizard to
complete the installation. Following this, press the “Demo” key to watch a brief video about your new X-keys.
The legends printed on the key caps will get you started with the functions in the default script file for the X-keys. We
encourage you to reprogram the keys and to use the included legend sheets to create the layout that works best for you.
Watch the demo video and tutorials or consult the MWII Help Menu for more tips and information.
Should you encounter difficulty installing any of our X-keys products, please check the troubleshooting guide on our web site
(www.xkeys.com). If this does not resolve the issue, you may E-mail our technical support department: [email protected] or
call our support desk: (517) 655-5523.
Compatibility
–
X-keys USB devices require MacroWorks II for Windows 2000, XP, and Vista. For older versions of
Windows, please refer to our website (xkeys.com). For Mac OS-X we offer iKey for X-keys software. Both programs are
included on the installation disk and are free of charge. X-keys USB devices also have a “Boot Mode” which gives them the
ability to mimic a USB keyboard and mouse on any USB enabled operating system (including Linux) after they have been
programmed. Learn more about Boot Mode on our web site (www.xkeys.com) or contact our Technical Support Department:
[email protected].
Identifying the Keys
–
Use the included legend sheets to select appropriate icons or print legends for your keys. The
keycaps snap off with a fingernail or small screwdriver. Apply the label under the keycap, and replace it. To print legends on a
laser or inkjet printer, go to our web site (www.xkeys.com) for templates formatted for popular applications. The key caps hold
a legend 0.575" wide and 0.5" high (14.6mm x 12.7mm).
Horizontal and Vertical Double-keys
–
The included double-keys replace two single keys on the X-keys. To install a
double key cap, remove two adjacent keys with the provided key-puller by positioning the key-puller teeth under the key and
pulling straight up on the key cap. Press the double-key in place over the two exposed switch stems.
