12
LCD 63SE (VG) Keypad
User Manual
Arming Both partitions A and B
For ARMING both Partitions A and B together, the user can use the
button, when this function
is programmed from the Installer .
Note:
With the ARM Button the user can arm the system only in “Full ARM” Mode. The user must
have a valid code with rights to operate in both Partition A and B!
ARMING Both Partitions A and B in “Full ARM” Mode (programmed from the installer):
Voice Messages in Arming Mode
(LCD 63VG SE)
With all arming modes, except
Instant,
after exit time starts running, the “
Please leave the premises
”
voice message will sound every 5 seconds . The buzzer will indicate that exit time is running . Ten
seconds before exit time is over, beep frequency will increase .
After arming, the “
System is armed
” message will be repeated twice .
In the events of AC loss and low battery, the “
AC power is lost
” or “
Battery discharged
” messages
will sound correspondingly 3 times every 5 seconds when arming is attempted .
Disarming of partition A, partition B or Both partitions
Going into the entrance zone the user must introduce his personal code . A continuous sound signal
indicates intrusion in the entry zone and entry time starts running .
Note:
Certain users may not be permitted to disarm the system.
Disarming of partition A
Disarming of partition B
exit
time
code
entry
time
entry
time
code
code
Note:
To the user code are assigned rights to operate with
Partition A, otherwise the system will reject the operation!
Note:
To the user code are assigned rights to operate with
Partition B, otherwise the system will reject the operation!
