manualshive.com logo in svg

Teleste EASI IP Series, User Manual, Page: 41 / 44

Share
Download
Teleste EASI IP Series User Manual Download Page 41

Copyright acknowledgements

Information  in this document is subject to change without notice and does not 
represent a commitment on the part of Teleste Corporation. 

Copyright © Teleste Corporation. All Rights Reserved. 

No part of this document may be reproduced, transmitted, stored in a retrieval 
system, or translated into any other language without the express permission of 
Teleste Corporation.
 
Teleste Corporation
Video Networks
P.O. Box 323
FIN-20101 Turku
FINLAND
www.teleste.com

Trademark acknowledgements

EASI

™ 

is trademark of Teleste Corporation.

WEEE directive

Directive 2002/96/EC of the European Parliament and of the Council on waste 
electrical and electronic equipment (WEEE) obliges that producers appropriately 
mark electrical and electronic equipment with the symbol indicating separate 
collection. This obligation applies to the equipment put on the market in EU after 
13 August 2005.  

Teleste devices which belong to the scope of the directive have been marked with 
the separate collection symbol shown below. The marking is according to the 
standard EN 50419. The symbol indicates that the device has to be collected and 
treated separately from unsorted municipal waste. 

BLUEbox series user manual rev002 

39

Summary of Contents for EASI IP Series













































Reviews:

No comments