manualshive.com logo in svg

Teleste EASI IP Series, User Manual, Page: 15 / 44

Share
Download
Teleste EASI IP Series User Manual Download Page 15

Video

Video confi guration

Click heading “Confi guration” under the 
Video menu on the left column.Video 
confi guration / video stream window 
appears on the right side of page 
(pictures 14 & 15). 
On this page you can modify device’s 
video interface confi guration.

Video Enable: 
BBE: Sets video encoding enable / disable
BBD: Sets video decoding enable / disable
Streaming Status: Video indicator (BBE).
(OK/stopped/invalid confi guration/error)
Camera Status: Video indicator (BBE).
(OK/not detected)
Video State: Video indicator (BBD).
(active/waiting/inactive/error)

IP Address: 
BBE: In multicast case, see note*. In 
unicast video case, the IP address should 
be receiving decoder device’s
BBD: In multicast case, see note*. In 
unicast video case, the fi eld should be blank
UDP Port: UDP port number. This number 
has to be same at both encoder and 
decoder pairs
Multicast TTL: “Time to live” value, can 
be set 1 to 255 (BBE)
Video Input: Video input type, either 
composite (CVBS) or S-video (BBE)
Video Format: Video format type, either 
PAL or NTSC
Video PID: MPEG-2 video PID value. 
This number has to be same at both 
encoder and decoder pairs
Audio PID: MPEG-1 Audio PID value. 
This number has to be same at both 
encoder and decoder pairs
PCR PID: MPEG-2 PCR PID value
PMT PID: MPEG-2 PMT PID value (BBE)
Low Latency Mode: Video latency 
setting. When enabled it reduces the 
switching time between different video 
sources (i.e.: camera touring). When 
disabled it improves video-audio 
synchronization. (BBD)
Stream Bitrate: Encoded video bitrate, 
selectable 3, 4, 5, 6, 7, 8, 9 & 10 Mbps (BBE)
GOP Format: MPEG-2 GOP format, 
selectable I, IP, IBP, IBBP (BBE)

Picture 14. 

Video confi guration page (BBE).

Picture 15. 

Video confi guration page (BBD).

Test Picture: Internally generated test picture 
enabled / disabled (BBD).
Test Picture On Error Delay (s): Test picture 
activating time in seconds when decoded video 
is corrupted or missing.

* In multicast case there should be same IP address /
  multicast group for video in Encoder and Decoder device.
  Gateway address is necessary for multicasting video
  (see Network confi guration / Gateway, page 12).

Note! The gateway address should be set before enabling 
the multicast video.

BLUEbox series WebUI user manual rev002 

13

Summary of Contents for EASI IP Series













































Reviews:

No comments