manualshive.com logo in svg

Teleste EASI IP Series, User Manual, Page: 31 / 44

Share
Download
Teleste EASI IP Series User Manual Download Page 31

Confi g-sap level

On confi g-sap level the user is able to change device’s sap (session 
announcement protocol) settings. Confi g-sap level is activated by entering 
command video sap (or v s) on confi g level --> “

IPx(config-sap)#

” text appears 

on the screen. Entering ? displays a list of commands for confi g-sap level. 
To read device settings, the user must return to enable level by entering 
command end (or en).

Commands:
end (en) - Back to enable level
exit (ex) - Back to confi g level
ip address (i a) [address] - Set multicast group for SAP advertisements
ip port (i a) [address] - Set IP port for SAP advertisements
ip time-to-live (i t) [0-255] - Set multicast time-to-live value
no shutdown (n s) - Enable SAP
quit (q) - Back to confi g level
send-interval (sen) [3-240] - SAP announcement interval
session-info (session-i) [text] - Max 30 characters describing session information
session-name (session-n) [text] - Max 30 characters describing session name
shutdown (sh) - Disable SAP

Picture 40. C

onfi g-sap level’s “?” view (BBE).

IPx(config-sap)#
  end            End current mode and down to previous mode
  exit           Exit current mode and down to previous mode
  ip             IP settings
  no             Negate a command or set its defaults
  quit           Exit current mode and down to previous mode
  send-interval  SAP announcement interval
  session-info   Video session info
  session-name   Video session name
  shutdown       Disable SAP
IPx(config-sap)#

Note! Only in BBE.

Note! Only in BBE.

BLUEbox series CLI user manual rev002 

29

Summary of Contents for EASI IP Series













































Reviews:

No comments