manualshive.com logo in svg

Teleste EASI IP Series, User Manual, Page: 4 / 44

Share
Download
Teleste EASI IP Series User Manual Download Page 4

Quick Instructions

Install the stand-alone BLUEbox device to the installation place. 
A 12 V supply voltage is provided by a CPS22x mains adapter. 

Switch on the system power and see that the “module”, “link” 
and “video” -indicators on the front panel of the device are lit. 
The “module” should lit green to show that hardware is 
operating properly.

Connect all needed audio/data signals to their respective 
connectors on the device’s rear panel.

Connect either a CVBS video signal to the BNC connector or a 
S-VIDEO signal to the mini-DIN connector of the device. 

Connect the Ethernet 100Base network to port “10/100Base-Tx” 
in the rear panel.

Note! You can create a local WebUI connection by this
connector using an Ethernet cable (e.g. OPUS1CCC0050X 
cross-connection cable).

Create management connection to the device either by over an 
Ethernet network or by a Mgmt port and then set all necessary 
settings in the device.
Default network addresses for the devices are are the following:
BBE: 10.9.96.10 (IP address)
BBD: 10.9.96.20 (IP address)
BBE/BBD: 255.255.255.0 (Netmask address)

Make sure that the device is not indicating any alarms or 
warnings. The “module”, “link” and “video” -indicators on the 
front panel should now lit green. If the “module” indicator is red, 
the device in question has a module error and is giving an alarm. 

Installation

1

2

3

4

5

6

7

2 

BLUEbox series user manual rev002

Summary of Contents for EASI IP Series













































Reviews:

No comments