manualshive.com logo in svg

Teleste EASI IP Series, User Manual, Page: 11 / 44

Share
Download
Teleste EASI IP Series User Manual Download Page 11

Web User Interface (WebUI)

Introduction

This chapter tells how to confi gure the settings using web 
user interface. 

General

The BLUEbox Encoders (BBE) and the BLUEbox Decoders  
(BBD) are fully controllable with the Web User Interface (WebUI). 

System Requirements:

* 

The PC equipped with an Ethernet Network card and an 
Internet browser installed.

* 

Cross-connected Ethernet cable 

 (e.g. 

type 

OPUS1CCC0050X). 

You can access the Web User Interface locally via Ethernet 
connector or remotely over an TCP/IP Ethernet connection.

Operation

Web User Interface window consists of several pages. Only one 
page is completely visible at one time. You can activate a page 
simply by clicking the page’s heading (see picture 10).
The Web User Interface has the following confi guration display 
pages that are introduced in this document:

- General Information
- Network Confi g
- Confi guration
- Video Management
- SAP Management
- Statistics (video statistics, only in BLUEbox Decoder)
- Change Password
- User Management
- Services
- Data Channel 1
- Data Channel 2
- Data Channel 3
- Statistics (data channel statistics)

The information on confi guration sheets is shown in data fi elds 
or boxes. You can change settings in data fi elds or boxes whose 
background is white. Place your cursor in the desired data fi eld or 
box and enter the new setting. Some settings are entered by 
ticking a checkbox or clicking on a radio button, by selecting from 
a pull-down list or by scrolling digits with the help of spin buttons.

Information without datafi eld or box is read only parameter and 
can not be change. 

BLUEbox series WebUI user manual rev002 

9

Summary of Contents for EASI IP Series













































Reviews:

No comments