manualshive.com logo in svg

Teleste EASI IP Series, User Manual, Page: 10 / 44

Share
Download
Teleste EASI IP Series User Manual Download Page 10

How to change the settings

General

This chapter tells how you can confi gure and check the settings of 
BLUEbox device with help of web user interface (WebUI) or 
command line interface (CLI).

Web User Interface (WebUI)

Teleste’s WebUI provides an user friendly way to confi gure and 
manage BLUEbox device. WebUI session can be accessed using 
Internet browser such as Internet Explorer. See next page for 
detailed description.

Command line interface (CLI)

Teleste’s BLUEbox device includes also a text-based user interface 
(CLI) for confi guration purposes. 

System Requirements:

* 

PC equipped terminal emulation program e.g. Hyper Terminal 
(supporting VT100 / 102 or ANSI protocols).

* 

RS232-cable (type Teleste CIC504), see table 7 for cable pinout

* 

Cross-connected Ethernet cable (e.g. Teleste OPUS1CCC0050X 
when using TCP/IP connection).

CLI is accessed Locally via Mgmt connector with a serial connection 
cable (CIC504) and any terminal emulation type program (e.g. Hyper 
Terminal) or Remotely via TCP/IP connection (e.g. Telnet). 
The command structure is the same for both session types. 
See page 21 for detailed description.

PC/PSION D9 

female 

RJ-45 

male 

BLUEbox

Receive data 

2 

2 

MGMT output

Transmit data 

3 

6 

MGMT input

System ground 

5 

1 

Ground

Table 7. 

RS232 cable (CIC504) pinout (D9 female / RJ-45 male).

User groups

There are four different groups of authority, which are determined by 
the username and password (see table 8). The username and 
password can be change: CLI confi g level (page 26) and 
WebUI (page 17).

guest guest 

guest

technician tech  tech
operator oper 

oper

  
administrator admin  admin

User Group 

Default 

 Default 

Authority

 Username 

 

Password

Read only access to general pages
Read only access to all pages
Read and write access to all pages 
and operational settings
Read and write access to all pages 
and all settings

Table 8. 

User groups

8 

BLUEbox series user manual rev002

Summary of Contents for EASI IP Series













































Reviews:

No comments