manualshive.com logo in svg

Teleste EASI IP Series, User Manual, Page: 30 / 44

Share
Download
Teleste EASI IP Series User Manual Download Page 30

Confi g-if level for Fast Ethernet

On confi g-if level for Fast Ethernet the user is able to change device’s Ethernet 
interface settings. Confi g-if level for Fast Ethernet is activated by entering 
command interface fastethernet (or in f) on confi g level --> “

IPx(config-if)#

” 

text appears on the screen. Entering ? displays a list of commands for confi g-if 
level for Fast Ethernet. To read device settings, the user must return to enable 
level by entering command end (or en).

Commands:
duplex auto (d a) - Set Ethernet port communication to automatic identifi cation 
(half/full duplex)
duplex full (d f) - Set Ethernet port communication to full duplex operation
duplex half (d h) - Set Ethernet port communication to half duplex operation
end (en) - Back to enable level
exit (ex) - Back to confi g level
ip address (i a) [IP address] [subnet mask] gateway [gateway] - Set IP 
address,subnet mask and gateway for Ethernet interface
ip address dhcp (i a d) - Device gets its IP address from the DHCP server
quit (q) - Back to confi g level
speed 10 (s 10) - Set Ethernet port speed to 10 Mbps
speed 100 (s 100) - Set Ethernet port speed to 10 Mbps
speed auto (s a) - Set Ethernet port speed to automatic identifi cation (10/100 Mbps)

Picture 39. 

Confi g-if level for Fast Ethernet’s “?” view.

IPx(config-if)#
  duplex        Configure duplex operation
  end           End current mode and down to previous mode
  exit          Exit current mode and down to previous mode
  ip            IP settings
  no            Negate a command or set its defaults
  quit          Exit current mode and down to previous mode
  speed         Configure speed operation
IPx(config-if)#

28 

BLUEbox series CLI user manual rev002

Summary of Contents for EASI IP Series













































Reviews:

No comments