manualshive.com logo in svg

Teleste EASI IP Series, User Manual, Page: 16 / 44

Share
Download
Teleste EASI IP Series User Manual Download Page 16

Video management

Click heading “Video Management” 
under the Video menu on the left column 
of page. Video management / quality of 
service (when BBE) / unicast video fi ltering 
(when BBD) window appears on the right 
side of page (pictures 16 & 17). On this 
page you can modify device’s video Qos 
and unicast video settings:

BBE: 
QoS Precedence: Quality of service 
level selection (class 0...4, best 
effort=class 0)
Polling Service: Polling service enabled/
disabled. This is needed to be enabled at 
all BBE encoders which are transmitting 
the unicast video to the same BBD 
decoder. Respectively, the unicast fi ltering 
must be enabled on BBD decoder

BBD: 
Filtering Service: Filtering service 
enabled/disabled. When enabled, the 
BBD decoder will be locked to the fi rst 
received unicast video stream. 
Respectively, the unicast fi ltering must be 
enabled on BBE encoder
Accepted Video Source IP Address: 
Defi ned source IP address. If left empty, 
the BBD decoder will be locked to the fi rst 
received video stream
Accepting video from: Actual source 
IP address
Received stream from: List of available 
sources IP addresses

Picture 17. 

Video management page (BBD).

Picture 16. 

Video management page (BBE).

14 

BLUEbox series WebUI user manual rev002

Summary of Contents for EASI IP Series













































Reviews:

No comments