TELES VoIPBox BRI, Reference Manual

Page: 83 / 280

4 Configuration files
VoIPBox BRI Version 18.0.002 Page 83
MailPropPort=<num>
Enter the port number for a TELES proprietary mail protocol.
MailPwdIn=<password>
Enter a password for incoming e-mail authentication.
MailPwdIn=<password>
Enter a password for incoming e-mail authentication.
MailPwdOut=<password>
Enter a password for outgoing e-mail authentication.
MailRcpt=<domain>
In <domain>, enter the destination domain, the destination address and an @ sign. If
the destination address is already complete (with an @ sign), <domain> is not added.
MailRcptMax=<count>
Number of "RCPT TO" entries in e-mails that come from the LAN (a message is sent to
the LCR for each "RCPT TO" entry in each incoming e-mail).
MailRcvMax=<count>
Maximum number of incoming e-mails queued for transmission via SMS.
MailSendRetries=<count>
Number of times an attempt is made to send an e-mail. Default 10.
MailTcpRcvTimeout=<sec>
Defines the number of seconds after which a session will be terminated following a
possible receiving error in the data stream. Default 0 (immediately).
MailTcpSndTimeout=<sec>
Defines the number of seconds after which a session will be terminated following a
possible transmission error in the data stream. Default 0 (immediately).
MailToHostRetries=<count>
Number of retries when SMS transmission is not successful. When the limit entered
is reached, an error message is sent to the e-mail sender (default 3).
MailUserIn=<username>
Enter a username for incoming e-mail authentication.
MailUserOut=<username>
Enter a username for outgoing e-mail authentication.
MaxMailsToHost=<count>
Maximum number of e-mail messages sent to the LCR simultaneously. Default 4.
SmtpServer=<ip addr>
In <ip addr>, enter the IP address of the destination SMTP server that is to receive the
e-mail messages.
Table 4.17 pabx.cfg Mail Parameters (continued)
Mail Parameters