TELES VoIPBox BRI, Reference Manual

Page: 210 / 280

8 Least cost routing
VoIPBox BRI Version 18.0.002 Page 210
8.4 Generating charges with the VoIPBox
To generate charges for the attached PBX, add the charge
variables described in Table 8.1
→
to the
MapAll
commands
according to the necessities of the corporate network envi-
ronment.
In the mapping example below, 3 initial tariff units (131-128)
are transmitted upon connection and a new unit is generated
every 1.65 seconds and transmitted the next full second.
Charges received from the public network for the connection
to the corporate network dial-in node are added and trans-
mitted (because 128 has been added to the start variable’s
value).
Upon connection establishment, 3 initial tariff units (131-128)
are transmitted. Then a 10-second delay ( wait =10) elapses be-
fore charge impulses are generated according to the time vari-
able (a new unit is generated every 1.65 seconds and
transmitted the next full second). Charges received from the
public network for the connection to the corporate network
dial-in node are added and transmitted (because 128 has
been added to the start variable’s value).
New charge models can be implemented by taking advantage
of the multiplication factor in conjunction with the time and
start/wait variables.
Example 8.4 Generating charges 1
MapAll0172=9123450172 1.65 131/0 ; time=1.65, start=131, wait=0
Example 8.5 Generating charges 2
MapAll0172=9123450172 1.65 131/10 ;time=1.65, start=131, wait=10