TELES VoIPBox BRI Reference Manual Download Page 127

Page: 127 / 280

6 System maintenance and soft-

ware update

VoIPBox BRI Version 18.0.002

Page 127

2. To update your system software, download the follow-

ing software files to your hard disk:

start

netbsdz

netbsdfs.gz

netbsdi

xbribox.tz1

or for older hardware (TAG5802 and 5801)

vbox.tz1

tools.tz0 (optional, for add-ons)

3. To update your GUI, download the following software

files to your hard disk:

httpd.izg

httpd.tz2

4. Start GATE Manager and connect to the system you

want to update.

5. Check the software version running on your system to

make sure the one you want to install is newer.

6. In the navigation bar, click

Directory

7. Right-click the

Directory

window and click

Send To Sys-

tem

8. Once the files have been completely transferred, check

the file size and reboot the system.

9. As soon as you can reach the system via GATE Manager

again, check the version number of the running soft-

ware.

An update of the following optional function modules occurs

in the same way. For a description of how to update the soft-

ware, please refer to

Chapter 6.3

→

Make sure the file extension has the same running number as

that of the file on the system:

SNMP agent:

snmpd.tz0

DNS forwarder:

dnsmasq.tz2

IP update - DynDNS client:

ipupdate.tz2

These files form a unit and belong to the same software

version. To avoid compatibility conflicts, check with TELES

service before you update the software.

Summary of Contents for VoIPBox BRI

























































































































































































































































































Search results

Summary of Contents for VoIPBox BRI

Reviews:

Brands by name

Popular brands

TELES VoIPBox BRI, Reference Manual

Search results

Summary of Contents for VoIPBox BRI

Reviews:

Brands by name

Popular brands