TELES VoIPBox BRI, Reference Manual

Page: 53 / 280

4 Configuration files
VoIPBox BRI Version 18.0.002 Page 53
If you must route specific net ranges to gateways other than
what is defined in the default route, make the following en-
tries in the [System] section:
Route=<target range> -netmask <ip mask> <ip gateway>
If only certain routes apply, leave the line DefaultGw empty.
4.1.2 Ethernet Interface Configuration
The following settings are possible for the sections [emac0]
and [emac1]:
IpAddress=<ip addr>/<netmask>
The IP address is entered in decimal notation, followed by a
slash (/) and the netmask in bit notation.
The following entry is used to allocate an IP address via DHCP:
IpAddress=dhcp
The following entry is used in the [emac1] section if operation
of the system is occurs in bridge mode. IpAddress=up
4.1.3 GUI Settings
The following parameter is used to change the GUI port in the
section [httpd] (default 80):
GuiPort=<num>
Example 4.2 Routing specific net ranges
[System]
DefaultGw=192.168.1.254
Route=10.0.0.0 -netmask 255.0.0.0 192.168.1.1
Example 4.3 IP address configuration
IpAddress=192.168.1.2/24