TELES VoIPBox BRI Reference Manual Download Page 13

Page: 13 / 280

Preface

VoIPBox BRI Version 18.0.002

Page 13

Safety Symbols

The following symbols are used to indicate important infor-

mation and to describe levels of possible danger.

Note

Useful information with no safety implications.

Attention

Information that must be adhered to as it is necessary to en-

sure that the system functions correctly and to avoid mate-

rial damage.

Warning

Danger. Could cause personal injury or damage to the sys-

tem.

Dangerous voltage

Could cause injury by high voltage and/or damage the sys-

tem.

Electrostatic discharge

Components at risk of discharge must be grounded before

being touched.

Explosion hazard

Injury hazard due to explosions endangering the person or

the system.

Summary of Contents for VoIPBox BRI

























































































































































































































































































Search results

Summary of Contents for VoIPBox BRI

Reviews:

Related manuals for VoIPBox BRI

Brands by name

Popular brands

TELES VoIPBox BRI, Reference Manual

Search results

Summary of Contents for VoIPBox BRI

Reviews:

Related manuals for VoIPBox BRI

Brands by name

Popular brands