TELES VoIPBox BRI, Reference Manual

Page: 76 / 280

4 Configuration files
VoIPBox BRI Version 18.0.002 Page 76
following example applies for the VoIPBox BRI with 4 ISDN
ports.
<mode> Defines the protocol for BRI lines:
DSS1
<line_type> Defines Point-to-Multipoint or Point-to-Point mode:
PMP Point-to-Multipoint
PP Point-to-Point
UNIT:<unit> (Optional) Defines the currency for the charges (default EUR). Special
charge generation is possible for:
France
UNIT:&F
Spain UNIT:&SP
Portugal UNIT:&P
Greece UNIT:&G
Switzerland UNIT:&CH
Netherlands UNIT:&NL
Italy UNIT:&I
NOTE: The <line_type> must be configured for these entries to work.
EXAMPLE:
Controller02=10 NT DSS1 PMP UNIT: VALUE:0.010
Controller03=10 NT DSS1 PMP UNIT: VALUE:0.010
VALUE:<value> (Optional) For DSS1 NT ports only. Defines the charges that accumu-
late by unit. Enter the values in the following formats: x.y, x.yy, or x.yyy.
Default is 0.120.
AUTOUP For TE-ports only: keeps ISDN layer 2 active all the time.
TRAP Sends an SNMP trap if layer 1 changes from active to inactive or from
inactive to active.
Table 4.14
pabx.cfg
: Controller Parameters (continued)
Controller<port>=<address> <type> <mode> <line_type> FCT UNIT:<unit> VAL-
UE:<value>
AUTOUP TRAP
Example 4.25 VoIPBox BRI with 4 ISDN ports
Controller00=9 TE DSS1 PMP
Controller01=9 TE DSS1 PMP
Controller02=10 NT DSS1 PMP
Controller03=10 NT DSS1 PMP
Controller04=40 VOIP