TELES VoIPBox BRI, Reference Manual

Page: 151 / 280

6 System maintenance and soft-
ware update
VoIPBox BRI Version 18.0.002 Page 151
n10
T30TxState T.30 transmit state. For values, see the entry for
T30RxState above.
n11
NumberOfTransferredPages Number of transmitted or received pages posi-
tively confirmed by answering fax.
n12
BadInputPacketId Sequence number of Bad Input UDPTL packet,
or the first two bytes of the input TCP packet.
The field is relevant if the “Bad CMD” or the “Un-
able Recover” bit is set.
n13
BadInputPacketTotalSize The total number of bytes in a bad fax packet.
n14
FaxBitRate 0 Undefined or 300 bpx (T.30 con-
trol signals)
1 2400 bps
2 4800 bps
3 7200 bps
4 9600 bps
5 12000 bps
6 14400 bps
7-15 Reserved
n15 DemodulationStatus 0 EQM and Timing Offset fields
are invalid.
1 EQM and Timing Offset fields
are valid.
n16 EyeQualityMonitor (EQM) Eye Quality Monitor measure for TCF or fax im-
age. The value of 0 corresponds to the best
quality of demodulation. Values greater than
100 have a negative influence on the quality of
the fax image.
n17 TimingOffsetPpm Timing Offset (ppm) recovered during demodu-
lation of TCF or fax image. The offset is a short
integer equal to the sum of the sampling rate
error and the sending fax baud rate offset. The
value is in integers and and may not exceed 50
ppm in the following ranges during fax trans-
mission (T30TxState):
65535 – 65486 (-50ppm) 0 – 50 (+50ppm)
Table 6.27 Fax status (page 2 of 2)
Value Field Name Description